Tabletop coater

Tabletop coater is an automatic plate-coating machine.Coating Condition is not fixed because it was human hand until now.Therefore become important to be coatingspeed automatic  at the stage of research.
This machine can coating at everbody the same conditions.Tabletop coater has attracted the attention Recently, recommend the automatic coating in JIS 

What's Tabletop coater

Tabletop coater will set up a film on top of the glass coating. And it was coated at a constant rate over film.Operation of the device  three  forward, stop, and  reverse only, but it has been devised to smooth motion.
It is a wirebar and applicator is necessary for coating application, but it is also available structure those of other companies.Therefore you can also use things that has been used until now.
A simple test equipment is available with high accuracy coating

Desktop coater application

①Wireber

Wirebar is a bar that wound the wire to the shaft.When the thickness of the wire that is wound around the shaft change gap of the wire and the wire will change. The film thickness is determined by the coating amount of the gap.Easy conditions will put out because it is changing the film thickness by changing the diameter of the wire.It's easy Swich over to migrate to the production phase.

Wireber list

TypeMILSMICRON
TYPEMILSMICRON
30.276.8630
2.70
68.6
40.369.14
322.88
73.2
50.4511.43
343.06
77.7
60.54
13.7363.2483.3
70.6316.0383.4283.3
80.7218.3403.6091.4
90.8120.6423.7896.0
100.9022.6443.96100.6
121.0827.4464.14105.2
141.2632.0484.32109.8
161.4436.6504.50114.3
181.6241.4554.95125.7
201.8045.7605.40137.2
221.9850.3655.85148.6
242.1654.8706.30160.0
262.3459.4756.75171.5
282.5264.8


Shaft diameter    6.35mm(1/4inch)

            12.7mm(1/2inch)

Shaft length      about 400mm(1/6inch)

Shaft winding width about 300mm(12inch)

②Applicater

The applicator is a product that can determine the thickness arbitrarily.Variable slit is using a digital micrometer.

Digital micrometer is a small mistake is easy to unlike setting the analog type micrometer.
Application that coating Size width can be selected from among the 140mm and 190mm and 240mm.

Tabletop coater users guide

ModelTC-3
Coating SelectWireber or Applicater
Speed10~100mm/sec
RangeMaximum stroke 315mm
Coating PlateGlass Plate 300mm×450mm
ControlTouch panel sequencer
SizeW376×D634×H306(mm)
PowerAC100V 50/60Hz 1.5A

Tabletop coater order made

④Vacuum suction cups

Fixation of the film offers an application that can easily.
To adsorb the film to the glass, it is adsorbed by a vacuum pump to open a small hole in the glass surface.
Glass is also easy to clean because the removal can be easily.
It was also considered easy to use it.

Contact us

Contact will be accepted in the form

Address and Access

233-10,nishisangao,Nodacity,Chibapref., 278-0015,Japan